|
|
|
|
 INSTA-CURE 1oz Thin Bob Smith
-- Bob Smith BSI102
|
|
<A name=instacure>INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together whil |
|
|
|
$4.99
Add To Cart
|
|
|
|
|
|
|
|
INSTA-CURE+™ 1/2oz Medium
-- Bob Smith BSI106
|
|
<A name=instacureplus>INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together fo |
|
|
|
$2.99
Add To Cart
|
|
|
|
|
|
|
|
INSTA-CURE+™ 2oz Medium
-- Bob Smith BSI108
|
|
<A name=instacureplus>INSTA-CURE+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together fo |
|
|
|
$7.99
Add To Cart
|
|
|
|
|
|
|
|
Zap-A-Gap 1oz
-- ZAP PAAR2105
|
| Fills gaps. Allows 7 to 10 seconds for positioning. Cures in 24 hours. Accelerate with KICKER. Bonds anything, even oily surfaces! Several sizes. |
|
|
|
$6.69
Add To Cart
|
|
|
|
|
|
|
|
MAXI-CURE+™ 1oz Thick
-- Bob Smith BSI112
|
|
MAXI-CURE™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling v |
|
|
|
$5.49
Add To Cart
|
|
|
|
|
|
|
|
INSTA-CURE 1/2 oz Thin Bob Smith
-- Bob Smith BSI101
|
|
<A name=instacure>INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while |
|
|
|
$2.99
Add To Cart
|
|
|
|
|
|
|
|
INSTA-CURE 2oz Thin Bob Smith
-- Bob Smith BSI103
|
|
<A name=instacure>INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together whil |
|
|
|
$7.99
Add To Cart
|
|
|
|
|
|
|
|
QUIK-CURE™ 5 min. Epoxy 4.5 oz
-- Bob Smith BSI201
|
| QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subjec |
|
|
|
$6.99
Add To Cart
|
|
|
|
|
|
|
|
QUIK-CURE™ 5 min. Epoxy 9 oz
-- Bob Smith BSI202
|
| QUIK-CURE™ 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE™ shouldn’t be used in areas that are subjec |
|
|
|
$10.99
Add To Cart
|
|
|
|
|
|
|
|
MID-CURE™ 15 min. Epoxy 4.5oz
-- Bob Smith BSI203
|
| MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is id |
|
|
|
$6.99
Add To Cart
|
|
|
|
|
|
|
|
MID-CURE™ 15 min. Epoxy 9oz
-- Bob Smith BSI204
|
| MID-CURE™ 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for QUIK-CURE™ in most applications. MID-CURE™ is our most flexible epoxy and is id |
|
|
|
$10.99
Add To Cart
|
|
|
|
|
|
|
|
FINISH-CURE™ 20 min. 4.5oz
-- Bob Smith BSI209
|
| FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sa |
|
|
|
$6.99
Add To Cart
|
|
|
|
|
|
|
|
INSTA-CURE 8oz Thin Bob Smith
-- Bob Smith BSI104
|
|
<A name=instacure>INSTA-CURE™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together whil |
|
|
|
$24.99
Add To Cart
|
|
|
|
|
|
|
|
FINISH-CURE™ 20 min. 9oz
-- Bob Smith BSI210
|
| FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by itself to give wood a surface ready for primer and paint. FINISH-CURE™ can be sa |
|
|
|
$10.99
Add To Cart
|
|
|
|
|
|
|
|
Z-Poxy Finishing Resin
-- ZAP PAAR2240
|
| Odorless, equal-mix, Cures in 6 to 8 hours. Easy sanding. Great for glass cloth, sheeting wings. Compatible with many polyester resins. PT-40 |
|
|
|
$14.99
Add To Cart
|
|
|
|
1 